centerconsole

[dullboy01]

wat center console will work on cb7's

[C91BLX7]

90-93 accord or DA integra

[eh22wagon]

90-93 accord or DA integra

iv never seen a da console in an accord... dose it look and fit rite?

[Night Wolf]

^^^ x2

what year is your accord?

90-91 have the e-brake in the middle.
92-93 have the e-brake off to the side.

of course you can swap between the 2

theres also the rare 92-93 centerconsole JDM center console with the intergrated armrest.

and the 90-91 armrest that bolts up to the 90-91 console

[JARHEAD293]

the da integra armrest looks almost like the cb7 90-91 usdm armrest. i had a few and not much of a difference, the one thing that stands out is that the da on has a built in cupholder. below is a pic of some of my old armrests. u can see the black da next to the blue cb7. enjoy

[oneoffaccord]

wow theres alot of center consoles. i never knew that a DA would work. oh well i have one already

[mndude07]

sorry for the thread revival, but the 9293 DX ebrake is also in the center, but still with a wider console than the 9091s

[AccordWarrior]

A member awhile back used a 97-01 Prelude piece.

A 92-93 console will NOT fit a 90-91 without converting the autobelt setup to manual style belts.

It is possible to move the e-brake in a 92-93 LX/EX from the offset position into the center to use the armrest console.

[blizzard335]

Never knew that 9091 and 9293 handbrakes were located differently

[MikeW]

Built in cupholders ftw.

Ok, i need to clear this up once and for all...

The 9091 CB armrests(the stand-up kind) WILL NOT fit the 9293 EX with the off-set e-brake. Unless i missed something, the one i have just wont fit. The 9091 e-brake console doesnt match up in a 9293 EX.

So unless i missed something, the 9091 stand-up armrest wont work in the 9293 EX.

Apparently, the 9293 DX(LX?) have a centered e-brake, yet a wide console that attaches to the front "shifter console". Unlike the 9091s. The 9091 e-brake console is skinny and stands alone, seperate from the "shifter console".

Now, the 9293 USDM wagon(??) armrest(the bulky one) WILL fit, at least, the 9293 DX/LX, with a center e-brake and WIDE console.

My question is, is there ANY armrest that will fit the 9293 EXs. With the wide console and off-set e-brake?

Ive looked, and there are holes on the floor where a centered e-brake would go, but in my car, those holes are just holes. No threads.

[blizzard335]

Oh, he was referring to the USDM models.

Sorry, my bad.

[AccordWarrior]

Built in cupholders ftw.

Ok, i need to clear this up once and for all...

The 9091 CB armrests(the stand-up kind) WILL NOT fit the 9293 EX with the off-set e-brake. Unless i missed something, the one i have just wont fit. The 9091 e-brake console doesnt match up in a 9293 EX.

So unless i missed something, the 9091 stand-up armrest wont work in the 9293 EX.

Apparently, the 9293 DX(LX?) have a centered e-brake, yet a wide console that attaches to the front "shifter console". Unlike the 9091s. The 9091 e-brake console is skinny and stands alone, seperate from the "shifter console".

Now, the 9293 USDM wagon(??) armrest(the bulky one) WILL fit, at least, the 9293 DX/LX, with a center e-brake and WIDE console.

My question is, is there ANY armrest that will fit the 9293 EXs. With the wide console and off-set e-brake?

Ive looked, and there are holes on the floor where a centered e-brake would go, but in my car, those holes are just holes. No threads.

There was a member awhile back, I believe 4drcord that tapped those holes to run an armrest console in an EX.

The reason for the armrest in the DX was that the LX/EX already had a seat mounted piece.

[NoRice84]

Where can i get a center arm rest?Do they make aftermarket ones that fit 90 accords?

[mndude07]

Where can i get a center arm rest?Do they make aftermarket ones that fit 90 accords?

Aftermarket? Not that I know of.

You can get different OEM ones on ebay, or at junkyards though.

[MikeW]

Darn...i was hoping id be the first.

Yeah, i'll deal with the 9091 not fitting, but im gonna do whatever i have to get the 9293 to fit.