weird my car wont go

[f23accord]

Weird My Car Wont Go Pass 5000 Rpm, Dont Konw Whats Wrong With It. Can Somr1 Help Me?

[PUMASTi]

Is the Check Engine Light (CEL) on?

[Jonas]

sounds like limp mode. or a fuel system problem

[f23accord]

is The Check Engine Light (cel) On?

Yes But Since I Put In The F23 On It Its On, I Can Floor It An It Just Wont Go Pass 5000 Rpm. I Can Hold The Gas Pedal All The Way Down For 30 Min N It Would Stay At 5000 Rpm But Just Release The Gas And It Goes Into The Next Gear

[Jonas]

turn caps lock off its annoying


if your cel is on then your ecu is running in limp mode. pull the code and find out what the problem is. probably a sensor that you didnt plug in or something. the f23 is an obd2 motor so did you do the conversion properly?
what ecu are you running?

[f23accord]

well im runing the same ecu stock n same dizzy

[visualpoet]

You're running the f22 ECU that was in the car or the one that goes to the f23?

[Jonas]

so your running a non vtec ecu with a vtec motor? maybe thats why it wont work over 5000rpm.

or do you mean the ecu for the f23? be more specific if you want help. otherwise your wasting peoples time

[f23accord]

so your running a non vtec ecu with a vtec motor? maybe thats why it wont work over 5000rpm.

or do you mean the ecu for the f23? be more specific if you want help. otherwise your wasting peoples time

dude im not tryong to wast no one's time, i posted here because with all this cb7 maybe a can get some help. i diren't change the ecu is the STOCK(f22) one thats in the car n it was ruing find, i know that the v-tec was not kicking in do to not being connected. thanks 4 all ur commentes

[visualpoet]

dude im not tryong to wast no one's time, i posted here because with all this cb7 maybe a can get some help. i diren't change the ecu is the STOCK one thats in the car n it was ruing find, i know that the v-tec was not kicking in do to not being connected. thanks 4 all ur commentes

You have a point. the only time you're wasting is yours. When you ask for help, give as much info as possible, then the people who can help you will know what you're working with. So, are you up and running or not?

...Since I Put In The F23 On It Its On, I Can Floor It An It Just Wont Go Pass 5000 Rpm...

Your previous posts make it sound as if you had an f22ax in the car. You then swapped it out for an f23 and since you've installed the f23, you have a CEL and the engine won't go past 5k. You said that you are also still using the non vtec ECU from the f22ax, which is probably where the problem is. The ECU from the f22ax that ran the old motor fine won't run the vtec at all. We all understand the frustration with your car, but the more information you give us, the less we have to work to fix your ride.

[f23accord]

never maind, thanks dudes i got it