i know how you guys love pics. i cant get any right now cuz its dark out and my camera is completely dead. so ill get tomorrow or when i get the time. anyway what i did was get a switch and alot of wire. then i came on here and google searched various kill switch ideas. so i looked info up on all fuel pumps seemed to be harsh on the engine. so i didnt do that idea. i found ways to cut ignition. my wire isnt that thick. kept searching and i figured why dont i come up with something different. i went to the car with the switch and wire. took everything apart looked at the fuel pump wires, and looked at the ignition wires. went online found a nice diy on how to kill power to the injectors. i didnt feel like skrewing with that. kept looking got under the dash saw the main relay. thats when i figured why dont i just cut the ground on the main relay. so i did. i cut the wire as close as i can to the wraped up harness. crimped my wires to the ground wires of the main relay. next i thought really hard about this where to put the damn switch. everyone puts it under or close to the drivers side dash or somewhere in the back seat. i wanted it somewhere where i can easily get to it and somewhere completely ghost. so i stoped working on that and started cleaning the car. took the crap out of the door pocket. at that very moment i figured ive never seen a switch in the pocket! so i took the door panel off. took the pocket off. measured the switch sideways so it can be as close to the bottom as possible. next i had to find a way to route the wires to the switch without anyone being able to see any kind of wire. so i figured the easiest way is to fish it through the boots between the door and behind the fender. so thats exactly what i did. im souped just wanted to share my happiness and my creativity. best part everything works.
Comment