Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

MAP sensor issues

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    MAP sensor issues

    My MAP sensor started throwing a code 3 so i have been spending my spare time tracing the only wire that i don't get a voltage from. i assume this is the wire i have a short in but i have yet to find a break in it but when i traced it back to the ecu i noticed the clip is a little banged up but the pins seem in good shape. is there anything else i should be looking into about this issue that im not thinking of? i do have a swap so i can only assume the loom was molested at least to add the vtec wiring etc. or could it be a bad ecu in general?
    1991 Accord LX Coupe H22 Swap (Sold)
    1993 Accord EX Sedan (Curent Project)
    2003 Civic SI Hatch (Sold)
    2003 Pontiac Grand Am ("In a Better Place")
    2004 GMC Envoy (The Daily that won't die) Currently at 380k shooting for 400k
    Tags: None
    #2
    Originally posted by Loghead View Post
    My MAP sensor started throwing a code 3 so i have been spending my spare time tracing the only wire that i don't get a voltage from. i assume this is the wire i have a short in but i have yet to find a break in it but when i traced it back to the ecu i noticed the clip is a little banged up but the pins seem in good shape. is there anything else i should be looking into about this issue that im not thinking of? i do have a swap so i can only assume the loom was molested at least to add the vtec wiring etc. or could it be a bad ecu in general?
    check to see if your geting it from the ecu.
    this was put together by evil_demon_01 . You can also fined all this and more by him in the Common Beginner Technical Info can be found in here. PLEASE READ HERE FIRST

    Not this one though.1990 to 1993 accord fuel psi .

    Car safety checks
    Diagnose a Check Engine Light (also S/D4 transmission error codes)
    How to Set Base Idle Properly (F22ax, F22bx)
    Cheapest Suspension Setup to Lower Your CB7
    Fluid Capacities

    Comment

    Previous template Next
    Working...
    X