Anyone know how much work (and what exactly) it would take to pull an EX lip off the bumper and put it on a 92 LX?
Announcement
Collapse
No announcement yet.
Lip
Collapse
X
-
it sounds like you don't know what a stock front lip looks like
here's what a stock lip looks like on the front end:
92 coupe's ride
if you're slammed to the ground, you're probably scraping every part of your car anyway.
if you have a reasonable ride height, you don't have much to worry about.
please take a look in the member's ride section to see what members have stock lips and how near to the ground they are.
members' ride section
92coupe's member's ride thread
absence of evidence is not evidence of absence.
Comment
-
ofif its off a the same bumper it came from the factory on.. they are 10mm bolts.. use a ratchet/adapter and your 10mm socket
then the lx will have holes just like the ex..and mount em upLast edited by accordzoom; 03-26-2004, 01:25 PM.
Comment
-
To follow up on what Uncle_El said...if the 92 lip is the same as the 90-91 lip, you need a 10 mm socket to do it...its the only way its gonna go on there easy and not really annoy you...trust me on that one...I tried an adjustable wrench first...and then had to break down and but the socket.
Comment



Comment