Post Your Shift Knobs/boots Thread

[Sobeman81]

Does aybody know if there is way to make the ITR shift boot seat all the wayup against the shift knob, no matter which knob u use?? all help is appreciated.

SHO

[phatdoughnut]

It isnt suppose to seat all the way up against it, its suppose to sit like this.

This is mine by the way. rsx knob with itr boot.

[wed3k]

check out my DIY for my new boot

[Ghostyman]

Skunk2 Weighted Shift Knob (threaded)
Real Carbon Fiber Shift Boot
-Painted Console Black
-Added Skunk2 and Neuspeed Silver Logos

Haha, I'm rocking nearly the exact same setup, down to the painted console In fact, the paint is drying on the console right now and waiting for clearcoat. I'm hoping Krylong semi-flat is close to stock.

I've even got the same CF boot from Jason. Only difference is my shift knob. I'll post pics once my console is done, the knob is pretty swass.

And hey, yo... is that glare on the corners of your console or has the paint rubbed off from the seats hitting it? Concerned citizens want to know...

[oneoffaccord]

JDM ITR SHIFT BOOT, JDM ITR SHIFT KNOB

[iamanonymous]

integra type r knob, custom made leather boot, diy short throw

[i97supratti]

Alrite, so I just got my Skunk 2 shifter yesterday, and it screws on fine. The problem is that the numbers are not aligned. Instead of looking like this:

1 3 5
| | |
+--N--+
| | |
2 4 R


It looks upside down. That's when it's tightened all the way down. If I screw it to the left and align it the right way, the knob sits very loosely. Any solutions to this? I see alot of people with this knob and they have no problem with it.

[chile]

not a good pic but CTR knob and itr shift boot...

[UK - Accord]

Alrite, so I just got my Skunk 2 shifter yesterday, and it screws on fine. The problem is that the numbers are not aligned. Instead of looking like this:

1 3 5
| | |
+--N--+
| | |
2 4 R


It looks upside down. That's when it's tightened all the way down. If I screw it to the left and align it the right way, the knob sits very loosely. Any solutions to this? I see alot of people with this knob and they have no problem with it.

u should have a lock nut with the shifter u use that to tighten it when in correct position buddy

[i97supratti]

u should have a lock nut with the shifter u use that to tighten it when in correct position buddy

Cool, the lock nut I got does not fit at all. It strips the thread on my shifter when I tried to force it. I'll probably just JB weld it down or somethin

[steelbluesleepR]

i short shifted the hell out of my shifter, put on a pilot shift knob (doesnt really go with my interior, but its the best lookin one that felt good at autozone), and made a black vinyl/blue stitching shift knob.

[Ronald_Type-R]

- JDM Mugen shift knob
- JDM ITR shift boot
- BB2 Prelude shifter assembly (custom shortened shifter & shifter mounting plate)
- Neuspeed short shift adapter

The Neuspeed adapter is a bit big, so it sticks out a bit, and it rips the heck out of my ITR boot...Ah well, looks don't matter, as long as it works good

Ronald

[604_SE]

bumpin this thread... need more ideas

anyone got a itr style boot with yellow stitching?

[slick]

so the itr boot has a rounded top unlike our accords which has a square one?

i need a nice shift boot to shit up close to the bottom of the skunk 2 knob i have

[AstroVannin]

Stock boot, stock knob....... 6" WEIR Extention.

Boot will be replaced with "accordian" corolla boot Knob is a metal flake red "teardrop" for a Peterbilt.