F22a4 Turbo Build. 350whp Goal.

[F-edUp1stGen]

should be a nice build. Theres nothing wrong with having a good sized turbo and not using all of it. Your intercooler looks a lot like mine in shape and size. I dont think mine would do 350whp with out having some heat soak issues.

Im going to have a lot of heating issues, Not sure how im going to work them out yet, but thats a problem for another day.

What kind of wheels are you going to be using?

Not sure yet. Probably 15 or 15's of something. Im thinking some golden 5 spokes.

[JDM_CB7_TX]

Are you gonna go with a drag radial or just some average tires.

[F-edUp1stGen]

when its at the track, it will have full on slicks. Thats going to me 100% manditory. But for show, it will just have some cheap ass 60 bucks a piece kumho tires. They are just going to get roasted off constantly anyways lol.

[h22sparkle]

What are you going to be using for mounts?

[Jccck]

Nice Banshee! My mate has one just like it, they fly!
You've got a similar goal to me, i'll have to watch this closely

Looks like you're having bad luck with the postal service, i hope they don't loose any of my turbo-build parts i'm ordering

[KeeleDesign]

hmmmmm. why not get a lsd tranny

[F-edUp1stGen]

What are you going to be using for mounts?

Custom made. Your going to see a TON of custom fab work done on this build. Because its job that requires everything 100% custom fabbed.

Nice Banshee! My mate has one just like it, they fly!
You've got a similar goal to me, i'll have to watch this closely

Looks like you're having bad luck with the postal service, i hope they don't loose any of my turbo-build parts i'm ordering

Thanks! I just rhinolined it yesturday. Looks freaking sweet lol

hmmmmm. why not get a lsd tranny

i will. When the time comes and i have money for one. I havnt looked into which tranny i need to get yet.

I need a Cable tranny thats as narrow as possible, and of course will fit the F series.. Suggestions?

[turbo90accord]

you shouldnt be blowing the tires off the car until over 300hp if you have decent tires.

As far as tranny what chassis is this going into?

[fatboy1185]

You will need a either a F22 tranny, H23 tranny, or a H22 tranny.

Unless you want to go F2B setup, and buy the adapter plate, you could run B series tranny's, or do a F2D setup, and run D series tranny's.

[F-edUp1stGen]

You will need a either a F22 tranny, H23 tranny, or a H22 tranny.

Unless you want to go F2B setup, and buy the adapter plate, you could run B series tranny's, or do a F2D setup, and run D series tranny's.

where do i find a D series adapter? D series are probably the narrowest trannys out there, so that would work best.

[fatboy1185]

where do i find a D series adapter? D series are probably the narrowest trannys out there, so that would work best.

http://bisimoto.net/store/index.php?...x&cPath=3_5_25

[quickangel93]

that intercooler is way to small

[F-edUp1stGen]

that intercooler is way to small

well theres no room for a bigger one. So its going to have to do as much as it can.


Eli, those plates are freaking expensive!!!
and out of the question lol.

whats smaller out of the F/H trannys?

[F-edUp1stGen]

AEM Fuel Rail and APR Head Studs showed up today

[F-edUp1stGen]

hey, the Oil feed line kit just showed up 30 seconds ago too!