clacking rocker arms

[arthaccord]

ok so i wonna go turbo one thing that worrys me a lil is my rocker arms ar a lil clacky and my car runs fine and when i take it into honda they never do any thing to it what should i do just leave it or would it be smart to fix it befor going turbo?

also what are some small things i should do besides tunning and stuff like that to make sure my motor will be safe

[KeeleDesign]

to make your motor safe......
well i am sure others will come and give the 3 page rules on turboing a motor.. for now i will say this.
prepare to maintence your car almost twice as much.
just for safety cautions. (my opinion)
wow actually scratch that,, i don't wanna get into all this, but yes you just probly need to adjust your rocker arms.. unless it's more severe

[cpl hero]

I was looking on the sight, isn't there a sticky on rocker arm adjustment? I thought there was but can't find anything.

[arthaccord]

ill check the diy

[quickangel93]

ok so i wonna go turbo one thing that worrys me a lil is my rocker arms ar a lil clacky and my car runs fine and when i take it into honda they never do any thing to it what should i do just leave it or would it be smart to fix it befor going turbo?

also what are some small things i should do besides tunning and stuff like that to make sure my motor will be safe

find a h23 head for your project. i heard they're better for boost and tunning. i bought a spare head for my project

[arthaccord]

dont have the time to swap it over or money right now but im wonna get the dsm kit thet guys selling on the forum wit basmap po6 injectors pluges every thing but bov and intercooler

[wed3k]

id spend the money makiing sure the motor can handle the boost.

clacking rocker arms = valve lash clearance?
i checked mine in about 20 minutes, very simple if you've done it before.

[quickangel93]

dont have the time to swap it over or money right now but im wonna get the dsm kit thet guys selling on the forum wit basmap po6 injectors pluges every thing but bov and intercooler

or else get another cylinder f22 cylinder head, like me and rebuild that.

[arthaccord]

i was thinking about ding a f22b get some vtec cuz i can get a head for cheep

[cpl hero]

id spend the money makiing sure the motor can handle the boost.

clacking rocker arms = valve lash clearance?
i checked mine in about 20 minutes, very simple if you've done it before.

bent or broken valves = F*cked piston

[arthaccord]

i just got off the phone with my bro its not that loud and hes says its normale for hondas and my car runs good and strong so im not gonna stress over it

[bresk8r87]

if youre motor's giving you signs of trouble now... i'd figure those out before you boost it. otherwise, youre just causing loads more trouble for yourself down the road. im speaking from experience.

[SMseagren83]

F22s are kinda noisy anyways. they arent like the new engines. check valve lash as stated above just to be sure.

our injectors are noisy too...so that can add to the ticking.

[evil_demon_01]

F22s are kinda noisy anyways. they arent like the new engines. check valve lash as stated above just to be sure.

our injectors are noisy too...so that can add to the ticking.

Yep a little bit of noise is normal esp on the F series, the noise is most likely piston slap, if everything else is in spec.

[jhondayaaj]

Yep a little bit of noise is normal esp on the F series, the noise is most likely piston slap, if everything else is in spec.

damn, I love your sig. sorry, ................... if you think that your valves are noisy, wait till you hear a b16 head. they fucken tick forever.