F22a performance valvetrain interest?

[wed3k]

Would there be any interest in a more budget alternative for valvetrain? i already have the 0.5mm OS stainless valves at a pretty good price.

i might have a titanium retainer and spring setup lined up and would like to put together a package deal.

having worked with a lot of f22 heads, i just don't see too many options out there and everything is made in USA.

[Jarrett]

Don't we already have a retainer solution in K-series retainers that you found? Wouldn't it be logical to extend that to K-series titanium retainers as well?

Other than that it seems that the days are passing on the viability of stuff like this. Everyone wants HIDs, hood bras and roof racks. They don't care about making real, well-built power. That said, I would really like to see something like this succeed. I acquired a couple of other engines so I'm not interested per se, but it would be good for the community.

[GhostAccord]

Any more details on the components and prices? Now that I have picked up a PT3 head for my build I could be interested in some F22A valve train components. The F22B2 valve train components that I purchased a while back no longer fit my needs.

I was looking at a complete Pro valve spring kit w/ti retainers and a set of 2mm OS Int. valves and 1mm OS exh. valves from Bisi.....

[wed3k]

well...not trying to be obvious but im comparing prices with bisimoto to see if it is worth my time.

basically if bisimoto offers a valve at 20 per valve, i could probably do it for 12 or less if packaged. i still have to do some research and see if the titanium retainer that i found will work.

i don't remember the k series retainer thread and even if i did, i may be able to get this done at a cheaper rate than other companies.

[djcaz_aom]

I'm down.

[Rookdarealest]

im also interested since i decided to build my f22 instead of a swap....

[wed3k]

so right now i can get:
0.5 mm intake valves
0.5 mm exhaust valves
valve locks
valve stem seals
bronze valve guides

im working on a titanium and spring package.

[8ball]

so guess this project is a bust?

[wed3k]

i never found a spring setup that would work with the titanium retainer but i already sold a set of valve guides and valves.