Will someone who has done the ROH conversion please do a DIY. I am going to attempt to do it this weekend but I feel pretty vague on what I am supposed to do. Pictures would be awesome!
Announcement
Collapse
No announcement yet.
ROH Conversion DIY
Collapse
X
-
http://www.cb7tuner.com/vbb/showthre...ight=rotor+hub
http://www.cb7tuner.com/vbb/showthre...ight=hub+rotor
not excatly diy's, but close. later.
-
Nice . I was reading MaroonAccords sort of write up and he mentioned Acura spindles. Do I have to by those too? So far I have Prelude Vtec rotors and calipers and 90 - 93 wheel bearings. I am trying to find a good deal to buy the Acura hubs. I thought I was set after the hubs so what about the spindles?
1993 Accord Ex Coupe
-1999 USDM H22A4, M2Y4
-JDM 17" WedsSport RS-5
-BFGoodrich T/A Sports 215/40/17
-JDM Fujitsubo Legalis-R Exhaust
-D2 Coilovers
-JDM Headlights
-Suspension Techniques Rear Swaybar
-Axxis Metal Master Brake Pads
-Recaro Seat
Comment
-
hub = spindle
you need the vtec lude calipers, brackets and rotors, new bearings, and the 98-99 CL hubs/spindles- the piece with the lug studs in it. you didnt mention that you had the lude caliper brackets... do you?
if you remove all the old stuff, reassemble using all of the new stuff the normal way you would install new hubs and bearings... its self explanitory once you have all the parts.
- 1993 Accord LX - White sedan (sold)
- 1993 Accord EX - White sedan (wrecked)
- 1991 Accord EX - White sedan (sold)
- 1990 Accord EX - Grey sedan (sold)
- 1993 Accord EX - White sedan (sold)
- 1992 Accord EX - White coupe (sold)
- 1993 Accord EX - Grey coupe (stolen)
- 1993 Accord SE - Gold coupe (sold)
Current cars:
- 2005 Subaru Legacy GT Wagon - Daily driver
- 2004 Chevrolet Express AWD - Camper conversion
Comment
-
It's super easy, if you have specific questions you are welcome to PM me. Here are some pics:
Pressing new accord bearing onto 98-99 Acura 2.3 CL spindle, you'll need the rotors from the 4-lug CL as well.
The parts (those white packages are rotor set screws, not rubbers....Bahaha!!)
Last edited by maroonaccord2.2; 08-03-2006, 03:34 PM.1992 Accord LX - SOLD
Comment
-
Originally posted by RalphieHow much are those new accord bearings...ive got mixed answers?? I might do this but i know for a fact that my bearings are going out!1992 Accord LX - SOLD
Comment
-
Thanks for the answers guys! I believe the brackets are already attached to the calipers. As for the 98 CL hubs, can I get them from an aftermarket store like napa or baxters, or is it dealer only? I called my local dealer and they wanted 140! I was looking at acuraoemparts.com and that seems like a good deal.
1993 Accord Ex Coupe
-1999 USDM H22A4, M2Y4
-JDM 17" WedsSport RS-5
-BFGoodrich T/A Sports 215/40/17
-JDM Fujitsubo Legalis-R Exhaust
-D2 Coilovers
-JDM Headlights
-Suspension Techniques Rear Swaybar
-Axxis Metal Master Brake Pads
-Recaro Seat
Comment
-
roh
great work guyz, honda needs to employ you guyz, my only quivel is here in the uk we dont have the 98 cl 2.3 sooo.... it would be a rare find..... by the way whats the part number for the cl hubs and i can just use the accord knuckle and 90 - 93 accord bearing yes ?. ok another question i also own a 5th gen accord and wanting to do the 5 lug swap i was told the 96 > oddessey hub works ok this mpv too is hard to be seen in the junk yard ( breakers yard) but im not sure if the accord knuckle can be used instead with this set up i also need the part number for the 5 lug hub the prelude rear hub is a sure shot to get hold of .let me know what up
'' we racing or you just blowing smoke ?''
Comment
-
The part # for the CL hubs is 44600-SY8-A00. Good luck; typically Honda dealers avoid Acura parts like the plague --- I think they have totally separate distribution systems that normally prevents parts ordering from the other brand.
Yes, you may use the Accord knuckle and wheel bearing.
As for doing a 5-lug swap, I'm less certain about mixing and matching Ody and Accord parts. But of course the whole Ody assembly is a bolt on and would give you bigger brakes.
Here's another good resource, although I don't know that it addresses the Ody questions: http://www.accordinglydone.com/forum...ead.php?t=3970
Hang on tight, because that thread, like most of these, gets squirrely!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Comment
Comment