Sorry h22 swap question

[93tunerofdacb7]

ok im sorry i cant find this anywhere..

everyone talks about using there f series wiring harness and just adding the wires for vtec, knock etc. But cant i just use the prelude h22 harness and go?

btw i have h22a1

[CBAccordA4]

easier to use the f22a harness, take into consideration of connecting a prelude harness to your attatched accord engine and chassis harness. It is much easier to just wire your extra needed sensors to the ecu.

[LinX]

Use the existing harness, its easier. Why make more work for yourself?

[93tunerofdacb7]

sorry i figured it would be easier to use the lude one but guess im wrong..

is there any detailed (with pics) diy on the ecu pin mod

[Night Wolf]

doing it that way you want will be a major PITA. so if its your 1st time, trust me it better to use the CB7 one

[evil_demon_01]

Common Swaps Info can be found in here. PLEASE READ HERE FIRST
Which leads to:
H22 SWAP: The Complete Parts List
Which leads to:

Parts required: 1-5 extra wires, depending on make, model and technique, will need to be run from the ECU to the VTEC Solenoid, VTEC Oil Pressure Sensor, Knock Sensor and IAB solenoid (exc. EX w/A6) on the new motor

Common Swaps Info can be found in here. PLEASE READ HERE FIRST
Which leads to:
Swap FAQ: (Read Prior to Posting!)
Which States:
"Use the F22 Harness", and also has detailed pics of the ECU harness wiring.


These new links weren't here when you made this thread, but the stickies were.
We don't do it this way to make more work for you, It just simpler to do it this way.