new swap time, it's about to get real big up in here

[almostJDM]

ok after reading you pm's here we go

I already have the swap, it was 1750 shipped to my door and came with everything, complete long block including turbo, 5spd trans, uncut wiring harness, ecu, MAF, and igniter, I am using an S13 rear diff and sub frame assembly I found one for $400+ shipping for an LSD version which I will be swapping out for a stronger one once I get this thing running without problems on the road because I plan to build the engine, the rear sub frame dimensions are 60 1/8" wide, that is measuring it from the very tip of the lugs on one side to the tip on the other, and the gap between the mounting bolt holes are 23 7/8" separating the rear holes and 42 1/2" separating the front holes at center, the CB is somewhere 65" wide If I remember correctly so it should put the brakes at roughly the stock width

[90ACCORDLXGUY]

I'm loving this build! Can't wait to see progress. Back in the day I planned to do a F20C rwd conversion and now this makes me want to do it again once I have a better job. Do you plan on drifting it at all?

[almostJDM]

not legally lol, no place to drift around here, -1 for wyoming lol, but I may try to drift while I am at I.A. 2012 if I make it next year with the cb if not then 2013 lol, I am building this just for the hell of it, no sole purpose, so I may just DD it for a while, while I build my scooby and ruckus, and once the ruckus is done ill DD that and leave the cb and suby for fun times, but the ruckus wont be done until after I move to phoenix

[blazenem]

not legally lol, no place to drift around here, -1 for wyoming lol, but I may try to drift while I am at I.A. 2012 if I make it next year with the cb if not then 2013 lol, I am building this just for the hell of it, no sole purpose, so I may just DD it for a while, while I build my scooby and ruckus, and once the ruckus is done ill DD that and leave the cb and suby for fun times, but the ruckus wont be done until after I move to phoenix

theres drifting in az...and wheres them damn pics lol

[PakaloloHonda]

Woah, and I thought what I was doing was a "project" .. lol
I, all of a sudden feel sooo depressed ..

Very bold project indeed. Mind if I .. pull up a chair?

[almostJDM]

Woah, and I thought what I was doing was a "project" .. lol
I, all of a sudden feel sooo depressed ..

Very bold project indeed. Mind if I .. pull up a chair?

nope not at all haha, tomorrow is metal shopping day, well at least im going to look around to see where the best deal is since I dont have my welder or plasma cutter in yet, got the air compressor though

[almostJDM]

tiny update just a few photo's nothing big


engine bay almost completely stripped just gotta remove the cross members, and the brake stuff like brake booster and hard lines, which will be done tomorrow, have to wait until I get the steering column and pedals removed to finish removing the wiring


got the interior nearly completely stripped just have wiring to remove, door panels, and steering column, and pedals

oh also I never got that garage because they were all full so this build is truly going to be garage built lol smokey9012's uncle is letting us use his garage, so I guess that's another thing I can tell the mag's

[cbscandal]

I want to see more. I'm in for this.

[almostJDM]

another minor update, well some more photos anyways

[almostJDM]

heres some of my part,tool, material list

Parts list:
RB25DET- Have
R33 GTS-T Manual Trans- Have
R33 RB25DET ECU and wiring- Have
S13 complete rear subframe assey- still need
S13 OEM Rear shocks/springs- ordered
BB6 Prelude front knuckles and hubs- Have
BB6 5lug front rotors- still need
40/40 prop valve- Have
Z32 rear 5lug hubs- still need
Z32 5lug rear rotors- Still need


Tool list:
plasma cutter- ordered
Tig welder- ordered
Mig welder- ordered
air compressor- have

materials list:

sheet metal- need to buy
1x2" square tubing- need to buy
1x1" square tubing- need to buy
other various metals- need to buy

[Darkcloud]

Nice list, funny how its a very little list but huge amount of work lol.

I'm hoping its a good turn out

Also I pm'd you man

[almostJDM]

Yea that's not the whole list, I am already thinking of things I've forgotten lol

Oh and I got your pm

[almostJDM]

MOAR FOTOS!!!





the engine will still be moved back an inch and the fan, A/C, and PS will be deleted off the engine so that will free up a few more inches





this is just too see what kinda of fitment issues ill run into, and I can honestly say I wont run into any for the engine

[A18A]

cool stuff. motivating me to hurry up with my sr20 accord lol.

[blazenem]

cool stuff. motivating me to hurry up with my sr20 accord lol.

very nice cant wait to see the progress