Engine Harness Difference between CB and CD?

[benstuh]

Hi, I'm currently doing a jdm h22 swap right now and everything is going fine until I got to the wiring part. I'm using a 94-97 guide

What I want to know is if there are any differences in the wire color because I can't seem to find IAT plug that has green/blue and red/yellow

or the IAC Valve.

Thanks

[Darkcloud]

OBD2 or OBD1

[CyborgGT]

See if your local library has AllData.

[benstuh]

It's an obdI motor and I'm doing it on a 92 accord

[Darkcloud]

IAT should be

Green/yellow or greem/white with a red wire

[benstuh]

Okay Thanks
The IAT wire was green/ white with red/ yellow.


These colored wires on the 94/97 guide seems to be different than the cb's

is there any websites with wire harness colors for the cb?

I still need to find MAP, EGR and IAC ones...

[Darkcloud]

Okay Thanks
The IAT wire was green/ white with red/ yellow.


These colored wires on the 94/97 guide seems to be different than the cb's

is there any websites with wire harness colors for the cb?

I still need to find MAP, EGR and IAC ones...

Iacv is
Blue/black and yellow/black

Egr is
Green/white or green/yellow,black/white,yellow/white

the map isnt on on the the engine harness of the cb its on the main Chassis harness

[benstuh]

the map isnt on on the the engine harness of the cb its on the main Chassis harness

I know that the Map isn't on the engine harness but the swap faq said for me to use the h22 map. So then I would use the h22 map sensor or the f22?

btw i REALLY appreciate you guys helping me out. It's so stressful figuring out this whole wiring thing.

[Darkcloud]

Use the obd1 h22 TB

[benstuh]

okay, so I plugged in all of the sensors but one on the cb harness does not have a spot on the h22.



this plug here with yellow/green and green/white

where does this go?

[cp[mike]]

i vote you start it up and wait for the CEL to tell you which one it is :P

[benstuh]

haha i wish i could. except the engine is out of the car!

[andrew22888]

That looks alot like the temp sensor plug.

[DarkHusk11]

It looks like the temp sensor that goes on the front that the h22 don't have.

[Jarrett]

Are you just twisting and taping that wiring? You should really solder it and heat shrink it. I just got 10ft of 2mm heat shrink on eBay for like $3, shipped.