k series swapping

['93CB7Ex]

who here if anybody is k-swapped?

looking to start mine soon.

what axles are available for k cb7's?

my setup will consist of:

innovative mounts
k24a1/k20a2 hybrid or k24a2 (still not sure)
rsx/ep3 5 speed manual for now
02-04 harness
hybrid racing universal k swap harness
kpro
gonna try to see if using oem shifter and cables is possible.


only need to figure out the axles.

any suggestions/comments welcome.

[Jarrett]

I was under the impression that the mount kits available for the K-series engine for Accord chassis were limited to Accord/TSX transmissions.

[BreckAConner]

I was looking that up the other day out of curiosity. I couldn't find anything but after market axles specifically for swaps and they were a crap load of money.

[CyborgGT]

HASport has the axles @ $444:
http://hasport.com/store/index.php/a...axles/kax.html

Check this feature out, he's a member on here under the name Jak Frostwhite. There are one or two others on here, I remember a member with "coupe" in his username"...
http://www.superstreetonline.com/fea...nda-accord-ex/

['93CB7Ex]

glad you posted that link to axles. i knew i saw somewhere that sold them but couldnt find them.

they make 2 different mount kits. 1 does only use tsx/accord and the other only works with type-s/si trans.

[CyborgGT]

Also, if you're familiar with Aaron Bonk's Honda Engine Swaps book, he's more recently published one based around K-swaps. It includes an Accord/Prelude section, albeit a bit brief compared to the Civic/Integra sections. Good general info on the different K engines though.

[sonikaccord]

If you're going to start, I can help out. I'm in the Atlanta area too

[Joey GT-R]

If you're going to start, I can help out. I'm in the Atlanta area too

Oh really? I'll remember that the next time I get excited about my pipe dreams.

[F22Chris]

Let us know if you need help man, I'd love to be a part of a k-swapped CB.

[CyborgGT]

We desperately need some write-ups for K-swaps on this site. There have been a few K-CBs already, and I think a solid DIY or two would really boost interest in the swap. We have enough serious F/H builds on this site, so I don't think the cost is too much of an issue anymore.

[af_1132]

There are one or two others on here, I remember a member with "coupe" in his username"...

This guy?



There's also VEGASCOUPE

[CyborgGT]

Neither of those look familiar, actually. It's been a while since I've really surfed the MRT section. But I found the one I was thinking of: ChampCoupe. Not sure if he ever completed the swap, though.

[sonikaccord]

He had his car posted for sale on IA, not sure if someone bought it or not.

[F22Chris]

Too rich for my blood. That driver side tranny mount looks kinda sketchy.

[bobbycos]

hmmmmmmmmm

winter project

already 5 lugged