Long story short, I'm putting a BB6 cluster in my CB7. I'm writing down all the wiring colors and their functions for comparison to the BB6 Lude wiring. I was going through my Accord Helms manual and found everything for the A and C plugs, but not the 22 pin "B" connector on the lower right as you're looking at the gauge cluster. The car is a 93 LX Coupe.
Here's what I have so far... "Not Used" indicates that there is no wire in that number pin:
1-
2-
3- Not Used
4-
5-
6- Red: Engine Coolant Temp Sending Unit
7- White/Green: Lamp Failure Sensor
8-
9- Not Used
10- Green/Red: Right Front Door Switch
11-
12-
13-
14- Green/Red: Low Fuel Sensor
15-Yellow/White: Fuel Gauge Sending Unit
16-
17-
18-Not Used
19-
20- Green/Blue: Driver's Door Switch
21- Green/Black: Door Indicator Lights
22- Green/White: Courtesy Light
Hope someone who knows how to read electrical circuit diagrams a little better than me can help!
Thanks in advance!
Here's what I have so far... "Not Used" indicates that there is no wire in that number pin:
1-
2-
3- Not Used
4-
5-
6- Red: Engine Coolant Temp Sending Unit
7- White/Green: Lamp Failure Sensor
8-
9- Not Used
10- Green/Red: Right Front Door Switch
11-
12-
13-
14- Green/Red: Low Fuel Sensor
15-Yellow/White: Fuel Gauge Sending Unit
16-
17-
18-Not Used
19-
20- Green/Blue: Driver's Door Switch
21- Green/Black: Door Indicator Lights
22- Green/White: Courtesy Light
Hope someone who knows how to read electrical circuit diagrams a little better than me can help!
Thanks in advance!
Comment