the injectors checked out good 2.3 ohms on all of them. so i decided to check one more time for a vacuum leak and im feelin around behind the intake mani and my middle finger gets sucked down over a whole and the car comes to an idle
i found the leak it was one of my IAB plates were i put JB weld to close off the hole where the rod goes threw for the butterflys. anyways the jb weld came out some how so i drilled and tapped the hole and put a bolt threw it so problem solved 

thanks alot guys for the help
i found the leak it was one of my IAB plates were i put JB weld to close off the hole where the rod goes threw for the butterflys. anyways the jb weld came out some how so i drilled and tapped the hole and put a bolt threw it so problem solved 

thanks alot guys for the help


CB7_HULK SMASH!!!
Comment