Where is it??
Announcement
Collapse
No announcement yet.
Crank position sensor
Collapse
X
-
There's not one. There is a camshaft sensor inside the dizzy. 5th gens have a crank sensor down behind the lower timing belt cover but the 4th gen does not.My Member's Ride Thread
Bisimoto header before & after dyno
1993 10th Anniversary: F22a6, H23IM, Bisimoto header, Custom mandrel exhaust, 5spd swap.
-
Right, Well i replaced the dizzy/cap/rotor/plugs/wires...and i got no spark. the smoke coming from the steering colum is really bothering me. Is there a relay, or controller on the firewall near the steering rack and colum that would control spark???Originally posted by 19dabeast85 View PostThere's not one. There is a camshaft sensor inside the dizzy. 5th gens have a crank sensor down behind the lower timing belt cover but the 4th gen does not.
90 Panda DX F22A6


Comment
-
Not for spark but there is the main relay under there which sends power to the fuel pump.....a common failure problem but I have never heard of one smoking. You'll need to either replace it or take it apart, clean and re-solder any broken connections.Originally posted by CB7Jay1 View PostRight, Well i replaced the dizzy/cap/rotor/plugs/wires...and i got no spark. the smoke coming from the steering colum is really bothering me. Is there a relay, or controller on the firewall near the steering rack and colum that would control spark???My Member's Ride Thread
Bisimoto header before & after dyno
1993 10th Anniversary: F22a6, H23IM, Bisimoto header, Custom mandrel exhaust, 5spd swap.
Comment
-
[QUOTE=19dabeast85;2674407]Not for spark but there is the main relay under there which sends power to the fuel pump.....a common failure problem but I have never heard of one smoking. You'll need to either replace it or take it apart, clean and re-solder any broken connections.[/QUOTE
But the main relay controls the pump not spark right?? Ive been working on the car for days now, and i cant route the problem. I might as well take the main relay apart, but i just dont think it would cause no spark.
I NEED to figure this out and save me the headache of bringing it to the shop.
90 Panda DX F22A6


Comment
-
What methods are you using to test for spark and fuel?My Member's Ride Thread
Bisimoto header before & after dyno
1993 10th Anniversary: F22a6, H23IM, Bisimoto header, Custom mandrel exhaust, 5spd swap.
Comment
-
x2^^^
Ride List
1990 Accord dx coupe - my baby (dsm turbo set up in progress)
http://www.cardomain.com/ride/3202853
2005 Mazda 6s - daily driver http://www.cardomain.com/ride/3171724(totaled
)
newest 2006 mazdaspeed 6
http://www.cardomain.com/ride/4073987/2006-mazda-mazda6
Comment

Comment