I purcahsed a WS2 exhaust and I installed my exhaust today and I have an issue, there is a part of the exhaust in the middle that hangs way to low its like 1'' from the ground. Here is a pic I took with my cell, I did use the old rubber hangers so I dont know if thats why, it just seems like its to heavy and is leaning down. I will go but some new hangers tomorrow and install them and see if that helps. Any other suggestions on how to fix this? Thanks
Announcement
Collapse
No announcement yet.
Ws2
Collapse
X
-
yeah your hangers are old and tired...I had this happen when I installed my RSR. Its a pretty HEAVY exhaust, the muffler itself is about 20" long (RSR), so that could be why. I know the Apexi is a rather quiet exhaust too, meaning more muffler/resonators in the catback.
My old rubber hanger stretched about a good 1/2 to 3/4 inch compared to the new one. Or you could always get shorter hangers and tuck it up that way.
member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
91 Accord SE 176k
97' Honda Odyssey 199k miles...$485 spare van for my parents
Comment
-
Originally posted by jimy View PostThats normal for the ws2 exhaust. The resonator hangs low.
That is one of the mods i really regret not doing before selling my Cb.
WS2....so sweet sounding.
Comment
Comment