CB7Tuner Forums

Go Back   CB7Tuner Forums > Site Features > Members' Rides

Reply
 
Thread Tools Rating: Thread Rating: 51 votes, 4.78 average. Display Modes
Old 07-12-2010, 02:47 AM   #1
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
P5ylance : 1992 Accord EX

Thanks to this site, I would have never realized the potential my accord could ever have. With this site's guidance, the help of some members (Thank you for answering my PM's and responding to my threads, haha), and the information and knowledge presented on this site, I was able to achieve a vision for my car far greater than I could have ever imagined. I am truly grateful for everything. With that said, I feel my car is now ready to present to my fellow members here on CB7Tuner. This is my pride and joy...

Lily the Accord


THESIS: Fuel Efficiency, Luxury Interior Conversion, VIP (Bippu) Style and AutoLuxury. Power and speed are not my priorities with this car as of yet, or if at all. My intent with this car is to create a luxurious daily driver that runs and flows smoothly with minimal issues, handles well, is easy on fuel, and looks great rolling slow, VIP Style.









Engine
F22A6 (294xxx miles) - Avg. Mixed Driving MPG = 24MPG, Avg. Freeway MPG = 28.9MPG
Automagic Transmission
Polished Heat Shield
Cleaned Throttle Body (TB)
NGK Spark Plugs (Iridium IX) and Wires *DONE FEBRUARY 2010*
Replaced Alternator and Fan Belts *DONE MAY 2010*
New Fuel Filter *DONE 6/13/2010*
New O2 Sensor *DONE 6/13/2010*
DIY Legend Hood Dampers

Suspension and Other
Tokico Blue Shocks *INSTALLATION FINISHED 6/2/2010, 278xxx Miles*
H&R Sport Springs *INSTALLATION FINISHED 6/2/2010, 278xxx Miles*
H&R Super Cup Kit *INSTALLATION FINISHED 6/2012*
Neuspeed Front Strut Bar
eBay Rear Strut Bar
Ingalls Front Anchor Bolt Camber Kit
New Axles *INSTALLATION FINISHED 11/18/2010, 284xxx Miles*
New Rear Hub and Bearing Assemblies *INSTALLATION FINISHED 11/19/2010, 284xxx Miles*
DIY Rolled Fenders (Front and Back)

Wheels
90-91 Accord EX Polished Aluminum Wheels
Riverside Altstadt 17x7 +35 Offset

Brakes
EX Front and Rear Disc Brakes
OE Replacement Rear Disc Rotors Installed *DONE 6/13/2010*

Exterior
eBay Projector Headlights w/ 6k HIDs
Clear Corner Lights w/ Reflector
Clear Bumper Lights w/ Reflector
Wal-Mart Fog Lights
94-97 Accord OEM Rear Mudflaps modified to fit
94-97 Accord OEM Front Mudflaps
92-93 Accord Coupe OEM Tail Lights
92-93 Accord Coupe DIY Red Clear Tail Lights
DIY 92-93 Accord OEM Grille, Civic SI Style
DIY 94-95 Accord OEM Rear Lip
DIY 94-95 Accord OEM Front Lip
DIY 94-95 Accord OEM Grille
OEM 90-91 Accord Grille (INSTALLED)
OEM 91-93 Acura Legend Coupe Lip (INSTALLED)
OEM Spoiler
OEM Honda Sunroof Visor
eBay Door Visors
G-Square Grille + Floating Junction Produce Emblem (Strictly for Show Use Only)
OEM 94-95 Accord Side Skirts
OEM 94-97 Accord Rear Sidemarkers
CB7 Clear Front Sidemarkers (in bumper)
OEM 92-93 Accord Foglights
DIY OEM BMW 7 Series Headlight Washers modified to fit
92-93 Accord Wagon Washer Bottle


Interior



DIY Full Leather Seat Swap [Donor Cars: Acura Vigor (Front) and Acura CL 97-99 (Rear)]
DA Integra Black Leather Headrests
Junction Produce Neckpads
Junction Produce Curtains
Junction Produce Cushions (For Show Use Only)
Junction Produce Shirotsuna and Fusa (For Show Use Only)
eBay Luxury Steering Wheel Cover
90-91 Accord OEM Grey/Black Shift Knob
Daewoo Nubira E-Brake Boot
Junction Produce E-Brake Handle Cover
Luxis VIP Foot Pedals
Chrome Gauge Rings
Galahad Vent Cupholders
Broadway Rear View Mirror
DIY CDM Black (DIY: Sprayed black, and waxed to get dull OEM look. Fabric is dyed with RITZ black fabric dye) Center Console Armrest for 92-93
DIY Dyed Black OEM 90-93 4G Accord Floor Mats, Complete Set (Replaced Blue Set)
DIY Dyed Black OEM 94-97 5G Accord Floor Mats, Complete Set (Replaced 4GA Set)
DIY Acura CL Map Light Retrofit *DONE 6/8/2010*
DIY Polished Shifter Plate
DIY "Accord" Door Sill Garnishes
DIY Kurotsuna Knot
DIY Kitsuna Knot
CB9 Wagon Storage Compartment
03-07 Accord OEM All-Weather Trunk Liner Mat
Acura Vigor C-Pillar Reading Lights
Acura Vigor OEM Black Gas/Trunk Lever Cover
Acura Vigor Black Leather Steering Wheel
Honda Civic SI EJ Coupe Middle Sunvisor
Acura Legend Headlight/Washer Stalk Rubber Boots
OEM 91-95 Acura Legend GREY Leather Handles
OEM Dealer-Installed Blue Leather for COUPE (DIY install)
DIY Rear VIP Tables
OEM INFINITI Q45 Rear Floormat (w/ INFINITI Emblem)
DIY Red Courtesy Light Lenses

Audio/Electronics
OEM Acura Integra CD/AM/FM/Cassette Stereo


Goals
INTERIOR
- Repair Seats

EXTERIOR
- Polish Metal Trim
- Polish Windows
- Rear Roof Spoiler
- Spoiler Gaskets
- New Weatherstripping
- PFMs
- Progress Rear Anti-Sway Bar
- Replace Cowl
- Flushmount Spoiler



TABLE OF CONTENTS

Pg. 1 - Introduction
Pg. 2 - Center Console Armest Installation+DIY, Door Panel Reupholstery Part 1, Side Picture, New Antenna
Pg. 3 - Conversation with TheNextEpisode about sound deadening/noise-cancelling, Teaser Pics of JP Items from Japan
Pg. 4 - New Painted Grille (Civic SI Style), CL Maplight, Glove Box Cover, Riverside Teaser Pics
Pg. 5 - Some neat items from Junkyard Diving
Pg. 6 - Riversides Installed, Parking Garage Pics with a Mercedes, Junction Produce Grille DIY Mock-Up
Pg. 7 - New OEM Stereo Set-Up Pictures, phAtPhotos Photoshoot 1
Pg. 8 - New DIY 5G Accord Floormats Dyed BLACK, Starting Eyelid Project, Updated Interior Pics
Pg. 9 - Flushmount Pics, Baby Pics
Pg. 10 - Acura OEM Tape Player Accessory, Legend Coupe Lip Installed, Fresh Wash, phAtPhotos Photoshoot 2
Pg. 11 - Front and Rear Strut Bar Installed, Painted Wipers, New DIY Headlight Cover Eyelids
Pg. 12 - Junkyard Find: Honda OEM CD Player Accessory w/ Screen
Pg. 13 - Eyelashes, Ground Shots, Freshly Detailed Lily and new Parking Structure Top Floor Photoshoot Pictures
Pg. 14 - Wagon Storage Compartment, Acura Vigor C-Pillar Lights (Mounting)
Pg. 15 - G-Square Grille + Junction Produce Emblem, 2003-2007 Accord OEM Rubber Trunk Tray, OEM Blue Coupe Leather Inserts
Pg. 16 - Red Clear Tail Lights Acquired, Yakima Roof Rack Acquired, RC Tail Meme Comic, A11 ICU + Acura CL Wiper Switch Acquired, Rear Passenger Curtains Acquired, S2K Sidemarker on Bumper Molding Mock-Up, Acura Vigor C-Pillar Reading Lights Install, Rear Leather Inserts Install
Pg. 17 - Honda Fit Washer Nozzle Retrofit, CD Hazard Switch, EJ Civic Coupe Middle Sunvisor Mod, OEM 5G Accord Side Skirts, Acura Vigor OEM Black Gas/Trunk Lever
Pg. 18 - JDM + USDM Foglights, All 3 Spoiler Options, Accord Coupe Leather Panels, New Tires
Pg. 19 - Lollicup Car Meet w/ SanJoCaF22DrAcc
Pg. 20 - Tinted Side Mirrors w/ LED Signal Markers, Whiteboard Roof Rack Fairing, Motor Problems
Pg. 21 - Prothane Suspension Bushings, DC Sports Header
Pg. 22 - Coupe Seat Rail Install, Rear VIP Table Install
Pg. 23 - Dead Transmission, 9091 Grille, Acura Integra Head-Unit, 9293 Grille Emblem in Steering Wheel, H&R Suspension Assembled, Cushion for Rear Strut Bar, Rolling Rear Fenders, OEM EX Muffler Polishing, Acura Vigor Steering Wheel, Whiteboard Roof Rack Fairing, Black Prelude E-Brake Handle, Installing Coupe Leather Panels, KMH Gauge Cluster Install
Pg. 24 - Acura Vigor Steering Wheel INSTALLED, 1G Legend Tape Cassette Holder, Acura Legend Leather Grab Handles, Acura CL Headlight/Wiper Stalks, INFINITI Rear Floormat, CD Rear Sidemarkers Installed, CD Rear Mudflaps Installed, Front Sidemarker Extension Harness, OEM 9293 Foglight Install
Pg. 25 - Front Sidemarker Install, DIY OEM BMW 7 Series Headlight Washer Nozzle Install, Wagon Washer Bottle + Wiring, Silencer Removed, New Exterior Pictures in a Nice Neighborhood, Progress Photos, New Swaybar Endlink Bushings, Apexi WS2 Exhaust
Pg. 26 - BLOX OH 2012 Reflection, New Catalytic Convertor, Ass Shots
Pg. 27 - Daily Driver Maintenance Woes, DIY Red Clear COUPE Tail Lights
Pg. 28 -




Introduction



The Drop



My Favorite Angle


Even Drop All Around


Other Pics

DIY Kurotsuna


DIY Kitsuna


Polished Shifter Plate


The Key to Her Heart


At the Parking Lot


Some Photoshoot Pictures




Bippu Style Accord. Notice the Curtains?


Thanks to a friend of mine:


I hope you all enjoy my MRT!
__________________
blackROSE Member, with a focus on VIP Style

Last edited by P5ylance; 03-04-2013 at 12:48 PM.
P5ylance is offline   Reply With Quote
Old 07-12-2010, 02:51 AM   #2
Fenderx69
CB7tuner Member
 
Join Date: Sep 2008
Posts: 254
Fenderx69 is cool... so far.
Send a message via AIM to Fenderx69
Love this car in a whole great mods.
Fenderx69 is offline   Reply With Quote
Old 07-12-2010, 02:56 AM   #3
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
hahaha dayum that was fast thanks for the compliment! I really appreciate it
__________________
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 07-12-2010, 03:14 AM   #4
mercyboy
CB7tuner Member
 
Join Date: Jan 2010
Location: Vancouver B.C
Posts: 1,070
mercyboy is cool... so far.
fcuk ya....that's one hella of a ride...VIP PEOPLE!!!!.......Leather interior by any chance got that from another car!!! lol
__________________
VS

Mercyboy: I rather lose by a mile because I built my own car then win by an inch because someone else built it for me..your car is your story, so don't let someone else write the book!

MERCYBOY THREAD:http://www.cb7tuner.com/vbb/showthread.php?t=158241
1990 RHD Honda accord si CB3 Canada http://www.cb7tuner.com/vbb/showthread.php?t=196287
MY CB7 ON YOUTUBE: http://www.youtube.com/watch?v=CJID_IxwiNY
mercyboy is offline   Reply With Quote
Old 07-12-2010, 03:23 AM   #5
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
lol thanks bro!

Front Leather Seats are from an Acura Vigor:
- Swap was straightforward, swap accord seat rails onto Vigor seats, and bolt in

Rear Leather Seats from an Acura CL 97-99:
- Swap was also straightforward, bottom seat falls right in, but you gotta bend a metal tab a bit to get it to line up with a bolt hole. The backrest just pressfits, I'm trying to figure out a way to get a latch on it that lines up with the accord
__________________
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 07-12-2010, 08:11 AM   #6
93SM4_CB7
CB7tuner Member
 
Join Date: Jan 2009
Location: Queens/NYC.
Posts: 1,801
93SM4_CB7 is cool... so far.
Send a message via AIM to 93SM4_CB7
Wow , this thing is freaking clean man.

Nice work

And is the final stance/drop with the race springs that give off a 1.5 inch drop ?
__________________

Check Out My Work In Progess . . . . .

Last edited by 93SM4_CB7; 07-12-2010 at 08:14 AM.
93SM4_CB7 is offline   Reply With Quote
Old 07-12-2010, 08:59 AM   #7
Daheavyking
Contributing Member
 
Join Date: Mar 2008
Location: The Bronx Zoo
Posts: 3,345
Daheavyking is cool... so far.
Send a message via AIM to Daheavyking
Now this is a sweet platform to work with!!!!!! Kudos to you my friend!
__________________
I fly by like the coupe grew wings!!!
Speeding!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My coupe!!!
http://www.cb7tuner.com/vbb/showthread.php?t=152924

Quote:
Originally Posted by Racer_XXX View Post
Excuse me miss, YOUR FUPA IS IN THE WAY!!!
Daheavyking is offline   Reply With Quote
Old 07-12-2010, 09:05 AM   #8
JunyAccord
Contributing Member
 
Join Date: Aug 2007
Location: Des Plaines ILL
Posts: 998
JunyAccord is cool... so far.
Send a message via AIM to JunyAccord Send a message via Yahoo to JunyAccord
this looks really great! i love the luxury look you are trying to accomplish. You just need a set of rims to set off the whole look. Maybe some louis vutton, coach, burberry, or fendi fabric for the interior panels?

http://www.urbansell.com/

thats what im planning on doing.
__________________
JunyAccord is offline   Reply With Quote
Old 07-12-2010, 10:36 AM   #9
F20A CB7
Contributing Member
 
Join Date: Mar 2007
Location: Milfville,Pa
Posts: 5,900
F20A CB7 seems to have made some friends! F20A CB7 seems to have made some friends!
i love this car, so much of a creative process with this thing, and i can see it, im a diy whore, and u r also.

really fukin sweet ride. i noticed u painted the door garnish silver at the bottom, sweetness.
__________________
**Blk Housed Slut Crew Member #1**

**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread

'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICE
F20A CB7 is offline   Reply With Quote
Old 07-12-2010, 01:05 PM   #10
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
10thannCB7: haha thanks! been working on it for two years now and yep, that is the final stance with the H&R Sport Springs (1.75F/1.5R). Its about an inch gap all around after everything has settled. I went from being able to fist my fenderwell gap to having to slightly cross my fingers. It's a good drop, enough to get rid of excessive fenderwell clearance and still have a tiny gap to clear for rubbing. I added a strut bar from eBay to improve the handling characteristics of the suspension and I will soon add front and rear anti-sway bars from Suspension Techniques when i get the money Other than that, some 17s oughtta fill up the rest of that black space very nicely

Daheavyking: thank you very much!

JunyAccord: thanks! yup i'd rather have luxury than a really powerful car at this point (planning on owning an NSX someday so that'll be my Go Fast Car hahaha), and i get a lot of compliments from people who sit in my car (especially my lady friends, haha). I condition my seats every other week to retain the softness. I've even got footpedals that cost me $210 (Dead Rest also), lol but they look and feel amazing (under my shoes). Definitely, i'm just trying to find some nice 17" rims that are affordable for me, and that will set it off but its SO hard to find Mercedes looking broad/flat-faced deep lipped rims (like Works Euroline DH for example, or some Work Equips) for my car in 4x114.3 haha so the search continues.. i've been on craigslist for the past 2 weeks and nothing remotely close has popped up. Why has no one made a knock-off of that style yet :'( lol.

Those example pics in that link you linked to look awesome! haha those chairs look surprisingly comfy

Yup! the door fabric is my next interior project! I recently picked up some leather fabric thats polyester and stuff, looks and feeels amazing. I'll take pictures of the project when it gets finished, on tuesday imma head over to my friends house and she's gonna help me sew them up, i just gotta go to the junkyard and pull off a piece of fabric for us to use as a template. I'm doing a pleated look, like the NSX. :3 can't wait to see how it turns out!

F20A CB7: thankss bro, DIY whores for the WIN! Love this car man, you have to think so much to get stuff to work for your car, like lips, side skirts, rear lips, swapping seats... it's fun cuz its not like i can go to a store and purchase all i need like civics and integs, its a whole new level of customization when you're in the CB game.

haha I went back to the picture to see what you were talking about, and thats actually my car, thats white paint. BUT, now that you mention it, having that painted as a silver lip looks pretty good :] too lazy to take it off and do it again though ^_^
__________________
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 07-12-2010, 01:10 PM   #11
JoshM
Moderator
 
Join Date: Dec 2007
Location: Franklin, TN
Posts: 15,736
JoshM has a HUGE cock! JoshM has a HUGE cock! JoshM has a HUGE cock! JoshM has a HUGE cock!
Send a message via AIM to JoshM
Love the "Larry Le" pics. Super clean coupe
__________________

1999 BMW M3
2001 Honda CR-V SE RT4WD
2005 Chevrolet Tahoe Z71
2015 Suzuki V-Strom 650
JoshM is offline   Reply With Quote
Old 07-12-2010, 01:25 PM   #12
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
haha fasho, he was a really good photographer to work with, got a lot of good photos and was a nice guy

thanks!
__________________
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 07-12-2010, 08:48 PM   #13
excalibur02
Wanna be JDM whore
 
Join Date: Sep 2003
Location: north new jersey Owns: Turbo cb6 & NA cb7 I'm: NJs 5-lug King ;-0
Posts: 3,853
excalibur02 seems to have made some friends!
Send a message via AIM to excalibur02
Wow nice accord! Everything is clean, polished parts and all.

Makes me want to polish some things
__________________


Instagram username MAURO02

If my pictures do not work and you see ****.com replace it with m1xe.com
excalibur02 is offline   Reply With Quote
Old 07-12-2010, 08:59 PM   #14
93SM4_CB7
CB7tuner Member
 
Join Date: Jan 2009
Location: Queens/NYC.
Posts: 1,801
93SM4_CB7 is cool... so far.
Send a message via AIM to 93SM4_CB7
you should post some more interior pictures , all those vip thingys got me curious lol
__________________

Check Out My Work In Progess . . . . .
93SM4_CB7 is offline   Reply With Quote
Old 07-13-2010, 01:06 AM   #15
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
Excalibur02: thanks a bunch! yeah ever since i discovered polishing after i saw TypeG's ride, I've been in love with making my car shine! I'm in the process of polishing all the steel trim around the windows, then i'll move onto polishing my glass and getting off the buildup of rain-X over the years, so that my black tint looks even blacker! and I always look at your car too really excellent ride you've got, very clean as well!

POLISHING PARTY

10thAnnCB7: Sure thing! I just finished installing my 9293 Center Console Armrest that I ordered from Canada today, it's been sitting in my house for 2 months untouched because i was trying to figure out how to relocate my e-brake safely to the middle, but now its all bolted up (the bolt on the rear of the bracket near the cables is a little sketchy, but it works, lol)! I took pics of the install, and will probably post up another DIY pretty soon! That sheetmetal is pretty damn thick :\ broke one of my cut-off wheels :'[ I dyed the armrest cushion black, and i sprayed the plastic black too, and to get that dull OEM look i waxed it. looks great.

tomorrow i have another free day, i'll take some interior shots of everything i've done inside then :] maybe detail while i'm at it!

Tomorrow is also the day i continue my interior door panel project... NSX Style (luxury style) door panels hereeee we go!!!

PS: been trying to get my 5th Gen side skirts fitted too... got my passenger side all lined up, and i transferred the holes onto the driver side, but i was off by a cm on the transfer, so i gotta do the saaaame dang thing i did for the passenger (locate all the holes and drill them)... so tedious, these things. :[ iono if i'll be able to make a DIY for them, the process was so involved and chaotic.
__________________
blackROSE Member, with a focus on VIP Style

Last edited by P5ylance; 07-13-2010 at 01:18 AM.
P5ylance is offline   Reply With Quote
Old 07-13-2010, 02:30 AM   #16
kouzie
Contributing Member
 
Join Date: Feb 2007
Location: 10,000 lakes
Posts: 15,421
kouzie is cool... so far.
Well done.
__________________

...........AE86-GTS: SOLD.................................................. ........CB7-DX: SOLD
kouzie is offline   Reply With Quote
Old 07-13-2010, 12:44 PM   #17
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
thanks ya
__________________
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 07-13-2010, 12:48 PM   #18
busak87
Contributing Member
 
Join Date: Aug 2007
Location: Burlington, Ontario
Posts: 1,380
busak87 is cool... so far.
Send a message via MSN to busak87
Car is soo clean man!!!


love all the DIY jobs youve done on it post up on how you relocated your ebrake to the middle, cuz I need to do that soon too...so I can put in my other armrest...
__________________


Quote:
Originally Posted by slammed4thgen View Post
be risky, be smart, and most of all be creative!
busak87 is offline   Reply With Quote
Old 07-13-2010, 12:50 PM   #19
[sLow]CB
Contributing Member
 
Join Date: Feb 2007
Location: Tacoma
Posts: 1,307
[sLow]CB is cool... so far.
my coupe brother. looking good. i like how the headlights look. hows the output on those?? can you get pics.
[sLow]CB is offline   Reply With Quote
Old 07-13-2010, 01:57 PM   #20
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
Busak87: thank you! lol all them DIYs give it character, haha! it's made, not bought... well, its bought, then made to fit. o_O

I will definitely post up the DIY, i took pictures of everything. straightforward, but the stuff you had to do is time consuming... Cut, place nuts under, bolt in... took me 2 hours. lol!

The output is really good, for plug-and-play from eBay. Construction is OEM-quality too, glass lens, i ran some silicone through the seals though just in case. I am very satisfied with them, especially since right out the box they're usable, instead of having to deal with retrofitting. cut-off is decent, definitely not terrible as so many people who knock on eBay projectors tend to say. draw distance is good as well, i light up a lot of stuff with them.

Loud92CB7 has great pictures demonstrating their output quality, I've always wanted to take pics but i could never find a nice wall to go to, haha! I will try to get some pictures though.
__________________
blackROSE Member, with a focus on VIP Style

Last edited by P5ylance; 07-14-2010 at 01:51 AM.
P5ylance is offline   Reply With Quote
Reply

Tags
1992 , accord , bippu style , p5ylance , vip

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:03 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.