Guys,
So a couple days ago i was driving back home and then out of no where i hear a poof and see smoke coming out. Long story short the heater core hose area/valve had a leak. I was able to park the car just fine.
I have been working on replacing all temp sensors (my temp gauge sits at hot while it actually isnt) I have replaced all sensors. During the process, the wires were frayed on the connector for the sensor that plugs right near the thermostat. What is that green connector called ? I am trying to see if i can buy a new one that i can splice into the current wires...
Also, i found that the secondary heater core hose (one that goes from valve to firewall) has a dripping leak. What is the best way to access that hose ? I have been working on removing the upper TB and its a pain.
Any clues ?
So a couple days ago i was driving back home and then out of no where i hear a poof and see smoke coming out. Long story short the heater core hose area/valve had a leak. I was able to park the car just fine.
I have been working on replacing all temp sensors (my temp gauge sits at hot while it actually isnt) I have replaced all sensors. During the process, the wires were frayed on the connector for the sensor that plugs right near the thermostat. What is that green connector called ? I am trying to see if i can buy a new one that i can splice into the current wires...
Also, i found that the secondary heater core hose (one that goes from valve to firewall) has a dripping leak. What is the best way to access that hose ? I have been working on removing the upper TB and its a pain.
Any clues ?
Comment