Wheel Well Trim

[XCRN]

I would think Auto Zone would have the stuff that goes along the border of the wheel wells, but I cannot find it. Where can I find more of it?

[AAPOQ]

Checkout cbs at your junkyard for the trim.

[DanCan]

To me, thats just a spot for moisture/water to sit and rust out your precious CB.
I personally took mine off the rear fender inside edge, the rust is already there. Better late than never tho.

Are you talking about the black trim that goes on the outside edge of all 4 wheel wells? Or just the 2 in the back that goes on the fender edge everyone rolls when "dumped"?

My buddy has the black trim on all 4 outside edges of the fenders, on a white car, looks like his wheel gap is worse than it is.

[1993 CB7 LX]

if its inside your wheel well, just take it off. save your quarter panels while you can

[XCRN]

It is the outer trim and I found them at the junk yard, now which glue should I use to keep it in place?

[Fleetw00d]

I used pieces of 3M thin double sided tape for the loose ends of the trim on my wagon.

[XCRN]

Will the tape hold up the trim on its own going 80mph?

[DanCan]

Will the tape hold up the trim on its own going 80mph?

as long as it`s 3M tape and not some dollar store knock off crap.
most window visors and door moldings are held with 3M tape double sided tape.
the real stuff has the strength to hold up in the weather/wind/water/nature.

[Fleetw00d]

It has held up for over 20,000 miles on my wagon (over 1300 in the last two days!).

[RyanD]

as long as it`s 3M tape and not some dollar store knock off crap.
most window visors and door moldings are held with 3M tape double sided tape.
the real stuff has the strength to hold up in the weather/wind/water/nature.

yea not double sided scotch tape for office use which i thought it was