I'm not getting fuel or spark.

[wildBill83]

Can you borrow an ECU to try swapping it out? Have you verified that your cam is spinning?

[evil_demon_01]

I also noticed when I have it in gear it tries to pull a little while im starting it. what could cause this?

Physics causes this . . .



It tries to pull a little? - , It should pull a whole lot, I'd suggest replacing your battery first . . .

[wildBill83]

Starting the car in gear is a bad thing. This is why they put the clutch switch and neutral switch in...

[evil_demon_01]

Starting the car in gear is a bad thing. This is why they put the clutch switch and neutral switch in...

Only in certain countries/markets
But your right, starting in gear is a bad thing

[STREET-SPEC]

I mean with the clutch in. I've never started a manual car in gear WITH the clutch in and had it move on me. it does have a brand new clutch that I didn't install but the guy who did is a mechanic.i think the clutch cable needs to be adjusted.

I also have 2 ecu's that I tried. one works for sure but is chipped for a 272 delta cam. but I ran it on my last motor for months. and the other is from a junkyard.

I think the check engine light stays when I've been doing this and I don't think it should.
i'll check some things tonight.

[evil_demon_01]

I mean with the clutch in. I've never started a manual car in gear WITH the clutch in and had it move on me. it does have a brand new clutch that I didn't install but the guy who did is a mechanic.i think the clutch cable needs to be adjusted.

I also have 2 ecu's that I tried. one works for sure but is chipped for a 272 delta cam. but I ran it on my last motor for months. and the other is from a junkyard.

I think the check engine light stays when I've been doing this and I don't think it should.
i'll check some things tonight.

It doesn't have a clutch cable.

Check the clutch master and slave for leaks, and re-bleed the system.