I tried ordering this tool last night and was told it was on back order for like 3 weeks. I need it yesterday if you know what i mean . so i decided to make it for my self. here is how i did it.you going to need a 1.5 x 1.25 black pipe hex bushing.
you can get it at your local ace hardware it is about $4. some 1in square tubing got mine at a scrap yard for $.20 and some 1/16 sheet mettle again scrap yard.
you need to file the corners of the pipe bushing round so that they will fit in the pulley
now cut a piece of sheet and cut a hole in the center ( do your self a favor a 1.5 in hole saw will work great for this )
make sure it is flush and weld it up.
now take your square stock and weld it on
do a little grinding and shaping and there you go.
this thing works great. i used it twice today and worked like a charm. in all i think it was $10 and about 30min of time.
you can get it at your local ace hardware it is about $4. some 1in square tubing got mine at a scrap yard for $.20 and some 1/16 sheet mettle again scrap yard.
you need to file the corners of the pipe bushing round so that they will fit in the pulley
now cut a piece of sheet and cut a hole in the center ( do your self a favor a 1.5 in hole saw will work great for this )
make sure it is flush and weld it up.
now take your square stock and weld it on
do a little grinding and shaping and there you go.
this thing works great. i used it twice today and worked like a charm. in all i think it was $10 and about 30min of time.
**Don't b scared be prepared for the worst**
great job.
Comment