thank u.. almighty h duece.. god.. ! w00t go cpmike..
Announcement
Collapse
No announcement yet.
Frankenstein lives!! H23VTEC headswap complete
Collapse
X
-
Alright...i will when i get home....it is just so cold out though...BRRRRRR"This is a jaded bunch. To gain notice, you have to challenge conventional wisdom, test assumptions, and ignore the naysayers."
FS Part out thread koni/skunk2 suspension, jdm pole, HID retrofit, Tanabe exhaust
http://www.cb7tuner.com/vbb/showthre...10#post2119010
Comment
-
Hm...how bout you come up from the warm sunny weather of FL and make vtec work while inhaling a breath of brisk cool air and cold rain."This is a jaded bunch. To gain notice, you have to challenge conventional wisdom, test assumptions, and ignore the naysayers."
FS Part out thread koni/skunk2 suspension, jdm pole, HID retrofit, Tanabe exhaust
http://www.cb7tuner.com/vbb/showthre...10#post2119010
Comment
-
"This is a jaded bunch. To gain notice, you have to challenge conventional wisdom, test assumptions, and ignore the naysayers."
FS Part out thread koni/skunk2 suspension, jdm pole, HID retrofit, Tanabe exhaust
http://www.cb7tuner.com/vbb/showthre...10#post2119010
Comment
-
if its any help and will make you feel better i went throught the same thing bout pulling my hair out trying to figure it out mine was the pressure switch wires were crossed the sad part about it was someone that knows nothing about cars found the problem what an oversight made feel like a dumbass
Shoot, wish my garage had some heat, that would be tightLast edited by shadetreecustom; 03-17-2005, 10:27 PM.F22A1:blew up
F22A1/H22:blew up
F22A6/H22: " "
F22A4/H22: " "
H23A1 boosted:blew up
H23A1:traded
H23A1/H22 built:still in progress (getting my feet wet)
drive it like you stole it
FCB7(FRANKENSTEIN CB7 CLUB)
Comment
-
Ummm...proposal/question...can it wait a bit longer or do we have to do this now? The bolt that broke on my manifold is still in the manifold so it'll need to be tapped out. Or i need to just cut the wastegate flange off all together and use the other one i have. And seeing as carlos wouldn't be able to be there why are we in such a rush? And besides that i gotta fix this wastegate prob or bum rides around again till i get it fixedLast edited by MRX; 03-18-2005, 09:05 AM.Knowledge is power...in EVERY sense of the word
FSAE (F Series Accord Enthusiasts) ..."A dying breed thats taking it to the next level" #12
Comment
-
MRX, Why don't I just come to you? Or, if that doesn't work I guess we can wait. I thought we were all going to Orlando because at first Wikked was gonna be there but that is not the case anymore. Then I thought you wanted to meet up with everyone for Dyno Day. So I am basically just trying to get to you so we can tune. Only thing is we have already made hotel arrangements and the card that the arrangements were made on has already been charged the amount. I am meeting up with 93vtecaccord accord and kmart tonight to hnag out and also swap ecus for a minute and see if it is the ecu or the wiring.
Let me know what your plans are asap so I can alter what needs to be altered."This is a jaded bunch. To gain notice, you have to challenge conventional wisdom, test assumptions, and ignore the naysayers."
FS Part out thread koni/skunk2 suspension, jdm pole, HID retrofit, Tanabe exhaust
http://www.cb7tuner.com/vbb/showthre...10#post2119010
Comment
-
See if u can cancel the hotel arrangements. We can do the dyno'ing here in jax but not this weekend cause they're closed. I'm just trying not to rush into all this ya know. Besides i know carlos really wanted to be thereKnowledge is power...in EVERY sense of the word
FSAE (F Series Accord Enthusiasts) ..."A dying breed thats taking it to the next level" #12
Comment
Comment