SanJoCaF22DrAcc : 1991 Accord EX

[SanJoCaF22DrAcc]

Finally got everything all buttoned up. The final set up is like this at the moment.

- AEM 3" CAI custom powder coated in a sexy green
- SkunkII 69... eh just kidding, 68mm throttle body
- Throttle body/BlackTraxx matched H22 upper plenum
- Black Traxx phenolic IAB spacer.
- Massaged F22A6 runner.
- Bisimoto Thermal gasket

I would of preferred not to use the BlackTrax IAB spacer but I had to. There was no way to install my IACV without it. I'm hoping to find some sort of relocation kit just to remove the spacer. Everything went well too. No real issues have come up. I hope nothing arises. Big thanks to JDM92_accorn for all of he insight. My buddy Ryan for his help along the way and MitsubishiV5 for the custom color.

[ShiroiKinCB]

I would like to see a close up of your turnsignal/fogs

[Hostile]

It looks clean. How is the butt dyno?

[408cb7]

Oh man that your engine bay looks great bro, have you drove it already.

[mitsubishiv5]

Where is that video of you doing 130 mph on 101

[SanJoCaF22DrAcc]

I would like to see a close up of your turnsignal/fogs

Details of my current set up are spread out through my MRT. Here's 2 pages that have pics of lighting details. Page 11, and 13. I do have an all up in to face pic of my fogs and turn signals but it's of my USDM fog light set up.

It looks clean. How is the butt dyno?

Butt Dyno can actualy feel a difference. I'm really happy and impressed with this mod. Next, Explicit Speed Engineering front traction bar setup and on to complete my 2.5" exhaust.

Oh man that your engine bay looks great bro, have you drove it already.

Thanks Hector. Yeah Ivo and I took it for a spin the same night I bolted
everything all up. I had Ivo take video. I can say that finally after all the engine mods I have made. These last one is the first that I can say for sure that it made a difference that I can actually feel. The intake sounds bad ass now. Very similar to an H. Next restriction has to be my 2" DC exhaust. 2" is also the factory spec but the DC was made with mandrel bends as opposed to the compression bends that Honda used.

Where is that video of you doing 130 mph on 101

Evidence, what evidence? Maybe I'll post it up.

[408cb7]

Damn i really wanted to see your car last night and see your new mods. Soon i should have the privilage.

[SanJoCaF22DrAcc]

Damn i really wanted to see your car last night and see your new mods. Soon i should have the privilage.

Yeah, I'm anxious to bring it out myself. Just didn't have time to bring it. Soon enough though bro.

[SanJoCaF22DrAcc]

Click here for the video of the test run after installing the new intake setup.
video

[SanJoCaF22DrAcc]

I cracked open my one piece headlamps today. Cleaned everything out with soap and water and then put them back together. I'm am thuroughly impressed. Took pictures of these just for you Jesse they are going on tomorrow. Enjoy

[408cb7]

I cracked open my one piece headlamps today. Cleaned everything out with soap and water and then put them back together. I'm am thuroughly impressed. Took pictures of these just for you Jesse they are going on tomorrow. Enjoy

Man those things are in great condition, so it was just soap and water that you used?

[SanJoCaF22DrAcc]

Man those things are in great condition, so it was just soap and water that you used?

Well, These have been in my possession for probably more than a year now. I completely removed the clear coat and repolished them when I first got them. Wasn't planning on installing these until after they have been black housed and retrofitted.

The housings themselves looked a little foggy and a bit yellow after polishing. I took some dishwasher soap and water to the in inner chrome and the inner lens. A damp paper tower was used to clean the buckets as the chrome is a bit more delicate. They came out looking BNIB. Can't say the same for the exterior chrome but I have always had plans to black all that out. The thought of tinting the corners amber while they were already apart crossed my mind. I'll have them mounted tonight after work. Might not be working yet though.

[Hostile]

Dang, those came out super clean. Cant wait to see them on the car. The closer it gets to CAM the more depressed I feel, but you guys will be representing for NorCal. Nice video clip. The sound of that intake set up is bliss.

[ShiroiKinCB]

The same thing we did with my cousins one-piece Acura Legend sedan headlights. They were cloudy, but after busting them open and cleaning and polishing them, its like "damn, I dint know your headlights were chrome"

[SanJoCaF22DrAcc]

Dang, those came out super clean. Cant wait to see them on the car. The closer it gets to CAM the more depressed I feel, but you guys will be representing for NorCal. Nice video clip. The sound of that intake set up is bliss.

Sorry to hear that bro. Just know you know your always welcom to anything we do. Plus, you got my number.

Yeah, the intake set up really made a difference. Sounds just like an H after 4,000. It just wants to go as well when it gets there. I'm still curious as to what it's going to feel like after removing the blacktraxx spacer. Hopefully the IACV relocation kit works. Then onto the exhaust and ECU tune.