Originally posted by Kev1990
View Post
I have three sets of shift solenoids and all three test at around 14 ohms. One set clicks the loudest and they are what's installed currently. I also no longer have codes for the shift solenoids. All that's left is this torque converter issue.
Originally posted by F22Chris
View Post
They are always noisy. I had one rocker arm that was excessive and I could hear it. It stood out from all the rest. It was an exhaust valve on cylinder 2 and I would guess it was at or near 0.0135. Not far off but far enough off that I could hear it.
I use Valvoline conventional 10w30. I will try and remember that about your experience with Lucas. I don't use it but a friend does.
I don't want to swap it out right now nor do I have the time. On top of it all with this site dead as a door nail it makes it harder than hell to gather up everything I need for a 5 speed swap. It's going to have to be one of those things I accumulate parts for until I have everything.
Comment