If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What did you use to clean your bay? I notice a brush lol nice job in the tuck btw. I still have to do my passenger side. Hopefully I won't find any cut wires like I did on driver side
Lol I used a broom stick for a hood prop. Good luck on the wire tuck, by the way I hated redoing that part.
I went back and checked out the turbo and manifold. You are going to run a half size triple core rad, right?
Goodness Gracious! I hope you have some meats planned for the fronts on track day! I want you to join the CB7 11sec. club. Only Boost and NW are there, maybe Scott too after he went turbo.
*** Think of others before thinking of yourself. ***
********** Spread love, not hate. ***********
****Lift others up with kind and helpful words****
F20A_CB7, I miss you, but I will see you one day.
"Nothing a little prayer can't fix."
I went back and checked out the turbo and manifold. You are going to run a half size triple core rad, right?
Goodness Gracious! I hope you have some meats planned for the fronts on track day! I want you to join the CB7 11sec. club. Only Boost and NW are there, maybe Scott too after he went turbo.
lol , yeah man. I am aiming for 10's. Triple core radiator is a must. I think NW has gone the fastest.
That would be pretty crazy to see a record breaking CB this summer!
I am going to try as hard as I can without blowing up the tranny. So far everything else I have should be enough for a 10 sec pass. Still debating on slick size for the track. I plan on making it a true street car that you can drive to the track , make a 10 sec pass and drive back home.
I am going to try as hard as I can without blowing up the tranny. So far everything else I have should be enough for a 10 sec pass. Still debating on slick size for the track. I plan on making it a true street car that you can drive to the track , make a 10 sec pass and drive back home.
Since you mentioned that idea, have you thought about getting the QTP exhaust cut-off? I am planning on running this, so when I want to be a little stealthy I can close the open dump and run the exhaust through the full 3" exhaust system. Then when I hit the track you open up the straight dump pipe for the extra ponies. http://www.quicktimeperformance.com/QTEC/index.php
Since you mentioned that idea, have you thought about getting the QTP exhaust cut-off? I am planning on running this, so when I want to be a little stealthy I can close the open dump and run the exhaust through the full 3" exhaust system. Then when I hit the track you open up the straight dump pipe for the extra ponies. http://www.quicktimeperformance.com/QTEC/index.php
I thought about that , but I think I am going to run just a down pipe.
Comment