Michigan Members

[CB7 Sleeper]

Anyone else going to this meet? I got the day off of work so I can definitely go.

Check my post in the meet thread. Hope to see you there.

[megarock15]

hey guys sorry i could not make the meet. I have been uber busy with this rear end swap. i went to the junk yard told them i wanted the parts for the rear disc swap and they gave me the entire reaer end of a 95 ex coupe. that means i have rear sway bar cross member upper lower and lower control arms shocks i have every thing. so i am going to see if i can bolt up the rear end as a whole and i will most likely have a lot of problems. but i just want to try something new.

[GeoffM]

hey guys sorry i could not make the meet. I have been uber busy with this rear end swap. i went to the junk yard told them i wanted the parts for the rear disc swap and they gave me the entire reaer end of a 95 ex coupe. that means i have rear sway bar cross member upper lower and lower control arms shocks i have every thing. so i am going to see if i can bolt up the rear end as a whole and i will most likely have a lot of problems. but i just want to try something new.

It's actually not that difficult. It's a bit of work, but nothing over complicated.
The Lower control arms that are in the front. The inside bolt (holding it to the crossbar) will be seized.

[megarock15]

Hey guys update on the rear disc conversion! Every thing bolted right up and its all on the car now. Just waiting to get some new calipers and some ebc gren stuff pads. Now I just need to run the new ebrake cables.

On another note I flushed my ce1 tranny fluid and filled it with honda atf and it is shifting so smooth. But I still need to tranny I have mated to my f23. I just found the vin number plate on the tranny did not pay too close of attention to it but it read ce1**** so I think its probably the one that came with the f22b. I have heard from a mechanic that I met when garage salling that said 98 & newer trannies share the same controll unit as the engine but I dont know if that is true. But either way o stil.need to check the tcu to see if it matches up with the tranny.

Such are the problems with swaped engines that you dont know the history of.

[megarock15]

Hey guys got another update for ya!

I just picked up a 91 civic hatch.

Wide body kit and back bumper
Jdm rear lighted wing
After market tachometer
Carburated D16b1 with aluminium short ram
Ebay headers straight piped to a muffler
After market stearing wheel and hub
Right now the coilovers are unkown to me

It has no front bumper right now. I am going to get an oe replacment and a decent lip for it.

Its quite a project. It runs great but I need to fix all of the wiring. The previous owner butchered it pretty bad

So thats my new dd untill I get my cb7 finished.

[megarock15]

Is there any one out there!?!?!

[megarock15]

I guess I will keep this thread alive.

Update.
The cb7 is now in my driveway. Now I just need to get my hands on a torch so can get the bracket for the ebrake cable off of the rear calipers so I can get the remanufactured ones from autozone. If any one has nintey two nintey three headlights andbumper lights let me know.

[GeoffM]

I guess I will keep this thread alive.

Update.
The cb7 is now in my driveway. Now I just need to get my hands on a torch so can get the bracket for the ebrake cable off of the rear calipers so I can get the remanufactured ones from autozone. If any one has nintey two nintey three headlights andbumper lights let me know.

Jeez man, 4 posts in a row?
My trans started having issues, so I wasn't as active.
It ended up being a sensor, but now I'm leaking ABS fluid.

[megarock15]

Yeah four posts in a row! I have been very active with my cars and projects.

[GeoffM]

Yeah four posts in a row! I have been very active with my cars and projects.

lol.
I'm working towards a completely tinted car. All windows that roll down have 20% on them.
I've been taking them off. I can get damn near perfect coverage that way.

We have a new member in our midst. Idk if he's here for good or not, but his SN is: Domesticated

[GeoffM]

What a busy summer we had

[nate'sCB7]

Hey guys, been a while.
I have a favor to ask. If any of you are at the junkyard and you happen to think of me, lol, i NEED a d16z6 vtec dizzy.

I picked up an EG8 that im in the process of gutting as i try to get it running.
The main bearings have been replaced, clutch, WP, timing belt, blah blah blah
but the only thing i need now is the dizzy and people out here either dont have one or want WAY to much for what they have.

[megarock15]

any one want an ef hatch?

[GeoffM]

any one want an ef hatch?

Le numbers?

[megarock15]

$900 91 ef hatch 4 speed stick d15b2 carbureter has aggressive body kit oem stanley rear wing sri headers straight piped slammed to the ground r34 style vent in hood