So solved most issues. The Speedometer was not working due to me plugging the EGR plug into the VSS and not the correct one. In my post above I asked what the plug with orange, yellow, and black wire went to and guess what that's the VSS harness. I forgot that the VSS plugs into the driver side harness.
Code 3: Was solved when I rewired the Accord Map sensor back in.
Code 41: I replaced the o2 sensor and it works great
I still haven't replaced the IAT sensor yet simply because I haven't bought a stubby yet and I don't want to strip out the screws or remove the intake.
I had to return the passenger side axle, as I took it for a test drive I kept hearing and feeling the axle pop out. Low and behold the Advanced Auto axle that I bought brand new did not come with a c clip installed. Got the new axle with the C clip and it holds the axle in place.
I also purchased a set of 2007 civic SI rims with decent tires. I tried mounting them last night but the fronts are rubbing on the Caliber, so it looks like I am going to have to run a 5mm spacer. Not something I want to do but I loved how they looked when I saw them on Jak FrostwHite's CB.
Also got the exhaust welded up with a flex pipe and now the car isn't embarrassing loud to drive.
Anyways no pictures this thread but wanted to give you guys an update.
Code 3: Was solved when I rewired the Accord Map sensor back in.
Code 41: I replaced the o2 sensor and it works great
I still haven't replaced the IAT sensor yet simply because I haven't bought a stubby yet and I don't want to strip out the screws or remove the intake.
I had to return the passenger side axle, as I took it for a test drive I kept hearing and feeling the axle pop out. Low and behold the Advanced Auto axle that I bought brand new did not come with a c clip installed. Got the new axle with the C clip and it holds the axle in place.
I also purchased a set of 2007 civic SI rims with decent tires. I tried mounting them last night but the fronts are rubbing on the Caliber, so it looks like I am going to have to run a 5mm spacer. Not something I want to do but I loved how they looked when I saw them on Jak FrostwHite's CB.
Also got the exhaust welded up with a flex pipe and now the car isn't embarrassing loud to drive.
Anyways no pictures this thread but wanted to give you guys an update.
Comment