To do list updated
Confirm rear main is not leaking (flywheel inner surface was dry, clutch cover did not have streams on the inside surface but was greasy. I did not clean it last time I took it off.)
Reseal oil pan with new gasket and Hondabond at corners and arch (check)
Oil/Filter Change (done for racing on 2/28, but will have to do again)
Run and check for leaks (a drip is forming on the bottom of the trans, but none on the ground, could be rear main, grrr)
Hook up Sdash and run from ECU (check, Awesome)
Adjust damping (6 to 8 clicks softer)
Check all fluids and tire pressures
Clean inside and out
Confirm rear main is not leaking (flywheel inner surface was dry, clutch cover did not have streams on the inside surface but was greasy. I did not clean it last time I took it off.)
Reseal oil pan with new gasket and Hondabond at corners and arch (check)
Oil/Filter Change (done for racing on 2/28, but will have to do again)
Run and check for leaks (a drip is forming on the bottom of the trans, but none on the ground, could be rear main, grrr)
Hook up Sdash and run from ECU (check, Awesome)
Adjust damping (6 to 8 clicks softer)
Check all fluids and tire pressures
Clean inside and out
Comment