How much reshaping/molding/cutting did the rocket bunny spoiler need?
Announcement
Collapse
No announcement yet.
Mike1357 : 1992 Accord EX
Collapse
X
-
Originally posted by Mike1357 View PostThanks for the props H311RA151N. While I like going in a different direction with my build, it's cool to know that there are other people out there that like it as well.
Originally posted by Lucien View PostHow much reshaping/molding/cutting did the rocket bunny spoiler need?
Comment
-
Originally posted by Jarrett View PostWhat did you pay to have the panels reupholstered? I was quoted $250.
Originally posted by Lucien View PostHow much reshaping/molding/cutting did the rocket bunny spoiler need?
Originally posted by H311RA151N View PostI want an S13 just to put the rocket bunny kit on it! I never thought about putting the rocket bunny spoiler on a CB. It's so aggressive but it flows surprisingly well!
I too am interested in this information... I don't want to say I'm going to copy you but I'm honestly looking into it.
As far as the spoiler goes, by all means go for it. I was the first one to do it and that's all I was really looking for so I don't mind if others emulate my look.
Comment
-
Did a bit of work on the car this past week. Swapped in my ESP 5 speed mount and t bracket as well as some Energy Suspension tension rod bushings. Now the car chirps hard into second and feels much more solid. Also changed around the intake configuration and changed it from 2 3/4 inch diameter to 3 inch. The car sounds a little more aggressive now.
Comment
-
I've had an M2W4 that I bought from a friend a while back that had bad synchronizers just lying around fro quite some time and recently I acquired an M2S4 that wouldn't go into reverse. I, being the brave technician I am, decided to split them open and make one good transmission. After some playing around I found my issue and got it back together tonight.
Comment
-
Looks like it was quite the headache. I have never seen a breather on the transmission before.Be unique, like every other person.
CB7 Sold________________________E34 Sold________________________E39 Current
Comment
-
Picked this bad boy up from Losiracer2 and got around to fixing it and partially installing it today while I was swapping out a wheel bearing. I've been wanting one of these for quite some time now so I was thrilled when I saw it was up for sale. Took it to a local machine shop to have two cracks welded on it then it was test fit time.
As you can see, my old Megan Racing header sat really close to my a/c lines which also made it a pain to install and remove, more so when I had the header wrap on it.
Call it quality or call it common sense but the GReddy header gives the a/c line tons of room.
Here you can clearly see the differences between the two.
Now one thing that gave me a moment of pause was seeing the difference in piping sizes between the GReddy downpipe and the Megan Racing downpipe. I can only think that the small piping size was an effort to maintain low end torque as well as keep it CARB legal.
As of right now I'm running a hybrid setup out of necessity (GReddy top half, Megan Racing bottom half). Within the next week or two I'll have the GReddy lower half re-welded with new material so that it is the proper length and have the proper flange. I'm looking forward to seeing the difference between having the larger diameter piping with a 2.25 collector versus the smaller diameter piping with the 2.5 collector (since everything from the header back is already 2.5 anyways).
Comment
-
Nice spark plug cover!!!
Comment
Comment