If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I will be the only one with an h here in kc, that is on here
Maybe not for long.. I tried to catch up with a Black, slammed and white rimmed CB on Renner near SMP yesterday evening. He had a DOHC VTEC sticker on the rear side window.. I caught up to him and tried to get him to roll down his window, I guess he thought I wanted to race... Needless to say I couldn't keep up.. I did get a plate number though... Hoping to get an address soon.. Later
Today is the day right..... Hit me up and let me know how it goes....
yes yes today is the day, and today is going by sooooo slow. My hubby gets off work at 2pm, then heading down there, have the belt ready to go. All I gots to do is the wiring, andhe has to put the belt on. Then hopefully hopefully It starts at least on the second turn of the key
I'm a waitin on it to arrive.. longest it should take is 1 week turn around.. i just need to take my time and let her cure before i send her backk.....
we tried to start the motor up, but no spark, so I tried to change the fuse from a 30 to a 10, still nothing. maybe the dizzy is bad, so we have another one we are going to try tomorrow
we tried to start the motor up, but no spark, so I tried to change the fuse from a 30 to a 10, still nothing. maybe the dizzy is bad, so we have another one we are going to try tomorrow
aww naw that sucks...
i'm sure ya'll checked all your grounds...?
have you already wired up the vtec....
i recomend you don't wire it up till you have your car running then wire it up,, thats how i did it..
just help eliminate any bad connections, even though in theory it shouldn't matter..
Comment